| Use | Model No. | Standard | Content | |
|---|---|---|---|---|
| Remote model | Integral model | |||
| General model | MGG11_/ MTG11B | MGG11_/ MTG11A | JIS C 0920 Water-resistant/Watertight model | Used for general purposes except for the following. |
| Submersible model | MGG12_ | JIS C 0920 Submersible model | The submersible model is used when the equipment is installed in a pit and temporarily submerged in water after rain. In addition, it is recommended to use the submersible model in installation conditions where condensation is a concern. For applications where the product is submerged under water, in seawater, or in liquids containing corrosive substances, the NNK_ _ _ submersible model is more durable. | |
| Open channel flowmeter detector | NNK___ | Japan Sewage Works Agency Compliant with article 40 of the Measurement Law | This is a flowmeter for total volume control management stipulated by the Basic Environment Law and other laws. It is used under water at all times and installed in an open water channel. | |
| Explosion-proof model | MGG15_ | 2.5–300 mm Exde [ia] IICT3–IICT4 JIS Intrinsic Safety Increased-safety explosion-proof structure | Used when the electromagnetic flow meter is installed in an explosive atmosphere. However, in the case of the remote type, the converter must be installed in a safe location. Therefore, take care that the cable length between the converter and the transmitter is not longer than 300m. Fluid temperature is -10 to 160 ° C to be compliant with (IICT3), -10 to 125 ° C and (IICT4). | |
| MTG15_ | JIS Intrinsic Safety Increased-safety explosion-proof structure Exde [ia] II CT4 | |||
| Sanitary model | MGS11_ | MGS11U MGS11F | JIS C 0920 Watertight model | This is for food and medicine. It has a structure without an area for liquid retention, and a clamp or exclusive flange system is adopted. The IDF/Tri clamp structure comes with ferrules for pipe connection (detector side: IDF clamp type, pipe side: welded type) as standard. Use JIS G 3447 sanitary tube for the pipes, and weld the ferrules to the detector. Steam cleaning can be used at 150 ° C for up to 1 hour. |
| Water meter | MGT20_/22_ | ＭGT20_ | The product is certified by Agency of Industrial Science and Technology and National Research Laboratory of Metrology. | This is an electromagnetic water meter that complies with the new Measurement Law. It can be used for transaction certification for tap water, industrial water, and agricultural water. Its diameter is 40–350 mm, and the converter has a sealed structure that prohibits data changes after shipment. Water meters are required to be inspected every 8 years. Azbil Corporation is registered as a designated manufacturer of water meters. |
| Liquor tax examination | MGS11U | MGS11U MGS11F | JIS C 0920 Watertight model For liquor tax examination | This is a flowmeter that was inspected for liquor tax certification in the presence of a certified measurer. Flowmeters for liquor tax certification are required to be inspected every 5 years. |