Model C1M/C1A/C2/C3 [Model SLP-C1F (free version) Installation]

You can download the free installation file for the SLP-C1F.
Please check the privacy policy at the bottom of this page, then fill in the customer information form to register and download the file.

File Information

Device	Model C1M/C1A/C2/C3
Software	Model SLP-C1F
Version	3.4.1 (Japanese/English/Chinese)
Size	Approx. 30.8 MB

Revision history

The following text is machine translated. Please be aware of this in advance.

*****************************************************************************
Form SLP-C1F Change Log

Version: 3.4.1 (May 2025)

New features

Added a function to create a restore point before setting or changing parameter values, so that the values stored at that point can be restored after changes are made.
Parameter values of conventional single loop controllers are converted during communication and file reading. Items in the conversion results requiring the user’s attention are now indicated.
Added the “RUN/READY at startup” parameter to specify the startup mode for the controller (Run or Ready).
Added logical OR of all DI states (Standard bit No.1168), SP ramp in progress (Standard bit No.1660), and PV alarm (Standard bit No.1793) to the standard bit numbers.
The PC will no longer go into sleep mode while the Numeric Monitor or Trend Monitor is running. This allows users to obtain trend data to identify slow systems with the PID Simulator, even when they are away from their PC.

Improvements

Supported model No. conversion when a model No. is read from a conventional single loop controller.
Expanded the range of parameters that can be converted when reading from a conventional single loop controller.
When the temperature unit of a conventional single loop controller is set to Fahrenheit, an “F” (indicating a model that supports Fahrenheit) is displayed when the controller’s model No. is displayed. Do not use Fahrenheit in countries (regions) that regulate units of measurement that are not part of the International System of Units.
Changed the initial value of [DO operation type] for models with a relay output.
Other minor improvements (displayed text, etc.) .

Program corrections

Fixed a problem where the process of initializing related parameters did not work when settings (PV input range type, etc.) were changed using the combo box below the menu icon on the setup screen.
When the settings were read from a conventional single loop controller, the model No. would become invalid, and after model No. conversion, the settings could not be written to the controller. Fixed this problem.

Version: 3.2.2 (August 2024)

New Features
1. The following latest F/W corresponding to C1M/C1A/C2/C3 can be updated.
  C1M: Ver. 1.0.3
  C1A: Ver. 1.0.5
Functional improvement
1. When the PV range type and temperature unit are changed, the decimal point position, etc. are updated in conjunction with the zone related set values.
Bug Fixes (None)

Version: 3.1.3 (July 2024)

New Features
1. Supported Fahrenheit model numbers. (Overseas specifications only)
2. Added the ability to copy & paste pattern information across banks.
3. Added support for C2/C3.
4. Added support for parameter reading functions for C25/26/35/36.
5. Added support for F/W update function of the regulator itself.
Functional Improvements
1. Displayed the communication address in the status bar while displaying the bank related to pattern operation.
2. Changed the delimiter for the trend monitor log save function to ";" (semicolon) when used in countries with numeric separators as "," (comma).
3. Made it possible to use X/Y devices of the MELSEC iQ-F series in octal notation.
4. Changed the USB loader cable driver to one officially supported by Win11.
5. Improved the operability of the model number setting window.
6. Improved to output all bank information of pattern information when outputting CSV.
7. Improved the display layout and other aspects.
Bug Fixes
1. Addressed abnormalities that occur during zoom in, zoom out, and horizontal scroll operations on the trend monitor screen.
2. Fixed an issue where settings written with SLP-C1F Ver.1 could not be restored with SLP-C1F Ver.2 when specifying Omron PLC in PLC link.
3. Fixed minor issues.

Version: 2.3.0 (December 2023)

New Features (None)
Functional Improvements
1. During the execution of the adjustment value restore function, improved to prevent initialization of the adjustment value area under specific conditions, and to display a warning if an issue occurs.
2. Modified to reset the main unit when the adjustment value restore is executed.
Bug Fixes (None)

Version: 2.2.0 (June 2023)

New Features (None)
Functional Improvements
1. Modified the list of configurable devices for Mitsubishi Electric's MELSEC F series. When connecting to the relevant PLC, please reconfigure the devices set with Ver. 2.1.1 or earlier using Ver. 2.2.0 or later.
Bug Fixes
1. Fixed an issue where device display may be corrupted in PLC link.
2. Fixed minor issues.

Version: 2.1.1 (April 2023)

New Features (None)
Functional Improvements (None)
Bug Fixes
1. Added display of the parameter "Operation Amount Change Limit."
2. Fixed an issue where some parameters would have abnormal values when reading settings created with form SLP-C35.
3. Fixed minor issues.

Version: 2.0.0 (February 2023)

New Features
1. Added support for form C1A.
2. Added a launcher program to launch SLP supporting forms C1M and C1A.
Functional Improvements
1. Changed the method of selecting communication ports on the environment settings screen.
2. Enabled direct input of addresses for form C1M in PLC link, and displayed parameter names.
3. Split the Mitsubishi PLCs into two categories: Q series and iQ series.
4. Added PLC-related monitor values to the numeric monitor. (PLC scan count, PLC scan time, PLC scan time (max), PLC max node count)
5. Changed the log save method for trend monitor. Previously saved with trend trigger settings, now always saves logs.
6. Changed the extension of the setting file saving parameters from *.c1f to *.c1m.
7. Increased the update speed of the numeric monitor information.
8. Improved the display layout and other aspects.
Bug Fixes
1. Corrected to properly reflect decimal point information in trend logs.
2. Fixed a zero-division error occurring under specific conditions in the PID simulator.
3. Fixed minor issues.

Version: 1.4.1 (August 2022)

New Features (None)
Functional Improvements (None)
Bug Fixes
1. Fixed an issue where the AT function in PID simulation may not complete.
2. Fixed an issue where changing the sampling period in PID simulation would alter the setting range of the PID slider.
3. Fixed minor issues.

Version: 1.3.1 (June 2022)

New Features (Initial release)
Functional Improvements (None)
Bug Fixes (None)

*****************************************************************************
Azbil Corporation
*****************************************************************************

Bug Fixes (None)

Installation procedures

If you would like to download, please agree to the terms and conditions and fill in the information on the form that will be displayed.

Privacy Policy for the Protection of Personal Information

This section explains how to handle personal data on the "Products and Services Site (https://aa-industrial.azbil.com/))" (hereinafter referred to as the "Website"), a website operated by the Advanced Automation Company (hereinafter referred to as the "AAC") of Azbil Corporation (hereinafter referred to as the "Company").

We handle personal information collected and provided by the Website as follows.

1. Policy for the Protection of Personal Information

We will handle personal information collected and provided by customers in an appropriate manner in compliance with laws and other regulations concerning the protection of personal information. We also comply with Azbil Privacy Policy for the Protection of Personal Information.

2. Purpose of Use of Personal Information

Except for cases stipulated by laws and regulations, AAC uses the personal information collected and provided by customers on the Website for the following purposes.

1) Company name: Azbil Corporation

For more information about the Company, please refer to the link for the representative and the location of the head office.

2) Privacy administrator: Azbil Corporation, Advanced Automation Company
General Manager, Control Products Marketing Department
Contact: Please see “4. Disclosure, Correction, Deletion, etc. of Personal Information” below.

3) The types and purposes of use of personal information collected and provided by customers on the Website are as follows.

<Type of personal information>
・ Name, email address, company name, department / office, address, phone number, and other personal information provided by customers in inquiries or on the Website

<Purpose of Use of Personal Information>
・  Provision of information on the azbil Group and its products and services (including company brochures, catalogs, and corporate magazines) by mail, e-mail such as e-mail magazines, fax, telephone, and other means
・  Information on exhibitions, events, seminars, campaigns, surveys, and gifts which the azbil Group performs or participates in
・  Surveys of the use of the azbil Group products and services and the environment in which they are used, and marketing activities
・ Information provided through sales activities when the azbil Group determines that its products and services are useful to customers
・  Responding to Customer Inquiries

3. Joint Use of personal information

Personal information collected and provided by customers on the Website will be shared within the following scope.

1) Items of personal information to be shared
Name, email address, company name, department / office, address, phone number, and other personal information provided by you in inquiries or on the Website

2) Purpose of Joint Use
As described in 3) of “2. (Purpose of Use of Personal Information) “

3) Scope of joint users
Affiliates of the azbil Group

4) Name of the person responsible for the management of Joint Use of the Personal Information
Azbil Corporation, Advanced Automation Company
General Manager, Control Products Marketing Department

5) Company name, address, and name of representative
Company name: Azbil Corporation
For more information about the Company, please refer to the link for the representative and the location of the head office.

4. Disclosure, Correction, Deletion, etc. of Personal Information

We will promptly respond to requests from the customers for disclosure, correction, addition or deletion of personal information, or withdrawal of consent provided by the customer on the Website. , . For requests under this paragraph 4, please contact us via the following.

Contact Form

<Contact for personal information>
Azbil Corporation, Advanced Automation Company
Sales Promotion Group, Control Products Marketing Department, Fujisawa Technology Center Techno Center

You may also use the Contact Form if you wish to make a complaint to us replating to your privacy.

5. Changes to this Privacy Policy

We may modify or amend this Privacy Policy from time to time. Any changes we may make to this Privacy Policy in the future will be posted on the Website with the date of revision.

Creationed on July 17, 2024

I agree to the collection of personal information.