This inline multivariable vortex flowmeter can measure the volumetric or mass flow rate of liquids, gases, and steam. A built-in platinum resistance temperature detector and semiconductor pressure sensor enable measurement of mass flow rate that is compensated for temperature and pressure.
- The volumetric or mass flow rate of liquids, gases, and steam can be measured.
- Selectable outputs: flow rate, temperature, pressure, calculated density of a fluid
- Highly reliable structure with no moving parts.
- Wide temperature range, from cryogenic liquefied gases to high-temperature gases and superheated steam.
Catalogs
Specification Sheets
Loader Packages, Drivers
Device DTM
Device DTM-HART®
| Model Name | Type | S/W Version | Version |
|---|---|---|---|
| PTG_ _ _<Rev1> | Pressure Transmitter | >=E.2 | →2.4.19.116 and Extension 2.0.0.0 for Model AVP7_ _ *1 |
| ATT_ _ _<Rev1> | Temperature Transmitter | >=1.4 | |
| MGG_ _ _<Rev1> | Flow Meter | >=6.0 | |
| MTG_ _ _<Rev2> | Flow Meter | >=7.0 | |
| AVP70_<Rev1> | Valve Positioner | >=2.2 | |
| AVP77_, AVP78_, AVP79_<Rev1> | Valve Positioner | >=2.2 | |
| Advanced Transmitter<Rev2> | Pressure Transmitter | >=5.1 | |
| Pro-V<Rev6> *2(AX2_ _ _) | Flow Meter | >=78.02 |
*1. Please install the extension in order to use the step response test and valve signature functions of models AVP7 _ _.
*2. Models AX2_ _ _ are registered as “Pro-V” by the FieldComm Group. Devices with a software version ending with 78.02 or greater are supported. The software version is displayed at power-on.
DD-HART®
| Model Name | Type | Device Type | Device revision | DD Revision |
|---|---|---|---|---|
| Pro-V<Rev6> ※2(AX2_ _ _) | Flow Meter | 8701 | 06 | →01 |
*1. If the device revision is 2 or later, the downloaded DD files include the previous DDs.
*2. The AX flowmeters are registered as “Pro-V” by the Field Comm Group.
