You can download the device driver for Windows 10/11 to use the USB loader cable (model 81441177-001) that connects Azbil devices to PCs.
Use this driver for USB loader cables labeled with “REV.05”, “REV.06” or “REV.07.”
Please check the privacy policy at the bottom of this page, then fill in the customer information form to register and download the file.
File Information
Device | USB loader cable (rev. 05 or later) |
---|---|
Software | Device driver installer for USB loader cable (rev. 05 or later) |
Size | About 5.98 MB |
Supported SLP | Model SLP-C35, model SLP-C45 Model SLP-C1F Model SLP-NX etc. |
Supported device | Model C15/C25/C26/C35/C36/C45/C46 Model C1M Model NX-D15/25/35, model NX-DX1/DX2, model NX-DY1/2 Model V8 etc. |
Supported OS Rev .07: Windows 10/11
Rev. 05/06: Windows 10
Note
This driver and the driver for an older version of the cable cannot be installed on the same PC.
When using rev .05/06/07 cables on the same PC, use this driver.
If you use this driver in combination with a Smart Loader Package (model SLP) that is not compatible with this driver, the COM port cannot be automatically selected by the USB loader cable automatic selection function. In that case, check the COM port number in the Device Manager and set it manually.
If you are using a cable without revision indication or if you are using Windows 7/8.1, please refer to USB Loader Cable (cable without revision indication & rev. 05/06) [Device driver for Windows 7/8.1/10] .