You can download the file for adding the SLP-C45.
Please check the privacy policy at the bottom of this page, then fill in the customer information form to register and download the file.
File Information
Device | Model C15/25/26/35/36 |
---|---|
Software | Model SLP-C45 |
Version | 2.6.0 |
Eligible users | SLP-C35 users who want to add the SLP-C45 |
Size | Approx. 3.5 MB |
After the installation, you will have:
SLP-C45 ver. 2.6.0 in addition to the SLP-C35 of the version you currently have
Supported OS: Windows7/8.1/10 (32-bit/64-bit)
Windows 10 (32-bit/64-bit) is now supported (ver. 1.3.0 or later).
Windows 7/8.1/10-compatible driver
Download and install the USB Loader Cable Device Driver for Windows 7/8.1/10.
Note:
For Windows 8.1/10, use USB Loader Cable rev. 05/06.
Note:
You can add the SLP-C45.
The loader cannot be installed using this file on a PC where the SLP-C35 has not been installed.
The SLP-C35J50/SLP-C45J60 does not run on Windows 98/Me/2000/XP.
Start the SLP-C35/C45 and check the version on the startup screen of the loader. In the example below, (2.1.0) and (1.1.1) are the versions. After checking the version, be sure to exit the loader.
Download the updater.
Click the updater you want to download, check the terms of use for the software, and click "I agree."Click "Save" to save the file to your PC.
Click "Save" to save the file.
Double-click the saved file to extract it.
- Double-click the executable file in the extracted folder to run the installer.
- The rest of the procedure is the same as the initial installation.
After installation, start the loader and check the version.
If the following version is shown, the update is complete.