You can download the upgrade file for the SLP-S40.
Please check the privacy policy at the bottom of this page, then fill in the customer information form to register and download the file.
File Information
Device | Model SPS |
---|---|
Software | Model SLP-S40 |
Version | 1.3.0 |
Eligible users | Those who have an older version |
Size | Approx. 10 MB |
Note:
Do not uninstall the older version of the SLP-S40 before installing the updater.
After updating the software, run the file below that matches your OS in order to install the USB Loader Cable Driver.
For 32-bit Windows 7/8.1
C:\Program Files\SLP\slps40\drvsetup.exe
For 64-bit Windows 7/8.1/10
C:\Program Files(x86)\SLP\slps40\drvsetup64.exe
Start the SLP-S40 and check the version by selecting [Help] → [Version].
After checking the version, be sure to exit the SLP.
- Download the updater.
Check that the SLP-S40 is not running, click the updater file to download it, and accept the terms of use. Select "Save" to save the file to your PC.
Double-click the saved file to extract it.
Double-click "update.exe" in the extracted folder to run the patch installer.
- The rest of the procedure is the same as the initial installation.
- Delete the downloaded file.
Start the SLP-S40 and check the version.
If the version is 1.3.0 as shown above, the update is complete.
To start the SLP-S40, double-click the SLP-S40(SPS4x) icon on the desktop or select [Start] → [All Programs] → [SLP] → [SLP-S40(SPS4x)].