You can download the upgrade file for the SLP-F10J20 (for 64-bit Windows 7/8).
Please check the privacy policy at the bottom of this page, then fill in the customer information form to register and download the file.
File Information
Device | Model SRF |
---|---|
Software | Model SLP-F10J20 |
Version | 1.9.0 |
Eligible users | Those who have an older version |
Size | Approx. 1.5 MB |
Note
- You can upgrade the SLP-F10/F20 to the latest version. You cannot install the latest version on a PC where none of the older versions have been installed.
- Do not uninstall the older version of SLP-F10 before installing the updater.
- The SLP-F20 ver. 1.0.0–1.2.0 cannot be upgraded because they cannot be installed on Windows 7 (64-bit).
Start the SLP-F10 and check the version.
You can check the version by selecting [Help] → [Version] from the menu. In the example below, 1.3.0 is the version. After checking the version, be sure to exit the loader.Download the updater.
If you have SLP-F10J20 ver. 1.3.0–1.8.6, download the updater for ver. 1.9.0.Click "Save" to save the file to your PC.
Click "Save" to save the file.
Double-click the file to extract it.
- Double-click the executable file in the extracted folder to run the installer.
- The rest of the procedure is the same as the initial installation.
After installation, start the loader and check the version.
If the following version is shown, the update is complete.Delete the downloaded file.