You can download the upgrade file for the SLP-P55.
Please check the privacy policy at the bottom of this page, then fill in the customer information form to register and download the file.
File Information
Device | Model DCP551/552 |
---|---|
Software | Model SLP-P55 |
Version | 3.1.2 |
Eligible users | Those who have ver. 3.0.0 or later |
Size | Approx. 14.8 MB |
Note:
You can upgrade older versions of the SLP-P55 to the latest version.
The latest version cannot be installed on a PC where SLP-P55 ver. 3.0.0 or later has not been installed. If the SLP-P55 has not been installed, install an earlier version of the software, and then update it.
The SLP-P55 does not run on Windows 98/Me/2000.
Do not uninstall the older version of the SLP before installing the updater.
Download and install the USB Loader Cable Device Driver for Windows 7/8.1/10.
Note:
For Windows 8.1/10, use USB Loader Cable rev. 05/06.
Start the SLP-P55 and check the version by selecting [Help]→[Version] on the loader.
In the example below, the version is 3.0.4.
After checking the version, be sure to exit the loader. Also, close the help file if it is open.- Download the updater.
If you have SLP-P55 ver. 3.0.0–3.1.1, download the updater for ver. 3.1.2. Click "Save" to save the zip file to your PC.
Click "Open Folder."
- Double-click the saved zip file to extract it.
Double-click the extracted file to run the updater.
Note:
During installation, the version information is displayed as in the right column of the following table. The numbers correspond to the versions listed in the left column. Please continue with the update.SLP version Version displayed during installation 3.0.0 3.00.000 3.0.2 3.00.002 3.0.3 3.00.003 3.0.4 3.00.004 3.1.0 3.01.000 3.1.1 3.01.001 3.1.2 3.01.002 - The rest of the procedure is the same as the initial installation.
After installation, start the loader and check the version.
If the following version is displayed, the update is complete.Delete the downloaded file.