The file below updates the Gateway Editor (for Windows XP/Vista) that is used to create applications for the CMC15G Communication Controller to the latest version.
Please check the privacy policy at the bottom of this page, then fill in the customer information form to register and download the file.
File Information
Device | Model CMC15G |
---|---|
Software | Gateway Editor |
Version | 2.1.04 |
Size | Approx. 48.9 MB |
Note:
- You can update older versions of the Gateway Editor to the latest or final version. You will need the serial number of the version of the software you purchased.
- The file is large, so you will need a high-speed connection to download it.
- If you install a new version on a PC where an older version has been installed, the older version will be removed before the new version is installed. However, project files you created, favorites in the address selection palette, etc. will not be overwritten.
- Download the setup file.
Windows 7/8.1/10 users:
If you have Gateway Editor versions 1.* to 2.1.04, download ver. 2.1.05 (approx. 50 MB).
Windows XP/Vista users:
If you have Gateway Editor versions 1.* to 2.1.03, download ver. 2.1.04 (approx. 50 MB). Click "Save" to save the file to your PC.
Right-click the saved file and click "Extract All."
(You can use a non-Windows extraction tool.)Double-click "setup.exe" in the extracted folder to run the installer.
If a warning about installing the USB driver appears in ver. 2.1.04 or earlier, click "Continue" or "Install". (The warning will be displayed twice.)
Follow the instructions to complete the installation.
Open the Gateway Editor and check the version.